Solvent Cement PRIMER

Application : Used in conjunction with appropriate Weld-on solvent cements, will make consistently strong, well-fused joints. It is essential that the joining surfaces of pipe and fittings be softened and remain softened
prior to assembly.

Size : in ¼ pint (118 ml), ½ pint (237 ml), pint (473 ml), quart (946 ml) and gallon (3.785 l) metal cans
Shelf Life/ Color : 3 years/ Purple


Standard : ASTM F-656, SCAQMD Rule 1168/316A

Certificate/Approval : - NSF/ANSI Standard 14 & NSF/ANSI Standard 61 for use on
potable water, drain, waste, vent and sewer applications.
- **LEED® (Leadership in Energy and Environmental Design).
- IAPMO

Sovent Cement C-PVC

Application :  WELD-ON 724 is especially formulated for use on industrial piping systems (CPVC) requiring chemical resistance to caustics, including hypochlorite solutions, mineral acids, aggressive water and aqueous
salt solutions. Approved for use with Corzan™ Industrial Piping Systems.

Size : in pint (473 ml), quart (946 ml) and gallon (3.785 l) metal cans, Max. Diameter : 12” (315 mm)

Shelf Life/Color : 2 years/Grey
Relative Set Time Medium

Standard : ASTM F-493, SCAQMD Rule 1168/316A

Certificate/Approval :
- NSF/ANSI Standard 14
- NSF/ANSI Standard 61 for use on potable water, drain, waste, vent
and sewer applications.
- **LEED® (Leadership in Energy and Environmental Design).
- IAPMO

PVC Solvent Cement

Application  :  WELD-ON 717 is for use on all types of PVC plastic pipe applications, Type I and Type II.

Size ½ pint (237 ml), pint (473 ml), quart (946 ml) and gallon (3.785 l) metal cans.
Max. Diameter: 12” (315 mm)

Shelf Life/Color : 3 years/Grey or Clear

Relative Set Time : Medium

Standard : ASTM D 2564, SCAQMD Rule 1168/316A

Certificate/Approval :
- NSF/ANSI Standard 14 & NSF/ANSI Standard 61
- CSA standards B137.3 and B181.2
- **LEED, IAPMO

Compression Fitting PE

Application : Water lines

Product Range : Joiner, Reducer, Elbow, End Cap, Tee equal, Tee Reducer

Size :
3G MetricTM :16mm - 63mm
Largel Bore : 75mm - 110mm


Material :
Body in black polypropylene co-polymer, nut in acetal/black copolymer polypropylene,O-ring gasket NBR,
clincing ring in acetal resin

Pressure Rating : 16 Bars

Operating Temp. : 0° - 20°C

Jointing Method : Mechanical joint

Standard : ISO 14236, AS/NZS4129 & 14236, AS/NZS 4020 BS6920,  AS3688, WIS-4-32-11, ISO7.1 & BS21, AS/NZS4130, ISO4427,EN12201

Certificate/Approval : NSF, NATA, WRAS, SA

Moulded & Electrofusion PE Fitting

Application : Water lines

Product Range : Coupler, tee equal, reducer, end cap, elbow  45deg,
elbow 90deg,transitions fittings, branching saddles

Size : Dia 20 mm - Dia 500 mm

Material : PE 100 (Black)
Pressure Rating : For water : SDR 11 (16 Bars)

Operating Temp. : 0° - 20° C

Jointing Method : Electro fusion

Standard : ISO 4427, BS EN 12201, BS EN 13244, BS EN ISO 15494, WIS – 4-24-01, WIS – 4-32-08, WIS – 4-32-14, WIS – 4-32-15

Other Feature : 4,7 Terminal pin, 39.5 Volt

Certificate/Approval : DVGW, IIP, Transco, WRAS, Kitemarks, Watermarks, SAI

Valve PP-H

Product Range :
Ball valve (VKD), Three way ball valve (TKD), Butterfly valve (FK), Ball check valve (SR),
Angle seat check valve Sediment strainer (RV), Diaphragm valve (VM), Compact diaphragm valve (CM)

Size :
 - Ball valves: from d16 to d110 mm, threaded from R½”up to R2”
- Butterfly valves: from d50 to d315 mm
- Diaphragm valves: from d16 to d110 mm,threaded R 3/8"- R½”
- Check valves: from d20 to d110 mm,threaded from R½” up to R2”
- Sediment strainer :from d20 to d110 mm,threaded from R½”- R2”

Material/ Color : PP-H Polypropylene homopolymer/ Beige - RAL 7032

Pressure Rating : 10 bar with water at 20°C (In case of different working conditions seetechnical catalogue )

Operating Temp. : 0° ÷ 100° C

Jointing Method :
- Socket Fusion and Butt Welding according to:DIN 16962 for coupling to pipes complying with DIN 8077/8078, EN ISO 15494, BS 4991
- Parallel threads according to: UNI ISO 228/1 - DIN 2999 - BS 21
- Tapered threads according to: ASA B 2.1
- Flanging according to: ISO 7005, DIN 8063, DIN 2501, ANSI B16.5150

Certificate/Approval : UL-94, TA-LUFT

Valve C-PVC

Product Range :
Ball valve (VX & VKD), Three way ball valve (TK), Butterfly valve (FK), Ball check valve (SR), Sediment strainer (RV), Diaphragm valve (VM), Compact diaphragm valve (CM)

Size :
- Ball valves : from d16 to d110 mm, from R½" to R4"
- Butterfly valves : from d50 to d315 mm
- Diaphragm valves : from d20 to d110 mm, from R½" to R2"
- Check valves : from d16 to d63 mm
- Sediment strainer : from d16 to d63 mm

Material/ Color : PVC-C Chlorinated Polyvinylchloride (Corzan®)/Light Grey - RAL 215

Pressure Rating : 16 bar with water at 20 °C (In case of different working conditions see technical catalogue

Operating Temp. : 0° ÷ 100° C

Jointing Method : Solvent welding metric size according to: ISO 727, EN ISO 15493
for coupling to pipes complying with DIN 8079/8080,- Solvent welding
plain tapered according to:ASTM F439for coupling to pipes complying
with ASTM D 1785/76,- Parallel threads according to: UNI ISO 228/1,
DIN 2999, BS 21,- Tapered threads according to: ASA B 2.1,-Flanging
according to:ISO 7005,DIN 8063,DIN 2501,EN 1452, ANSI B16.5 150

Certificate/Approval : UL-94, TA-LUFT

Valve U-PVC

Product Range : Diaphragm valve, Butterfly valve (FK/FE), Ball valve, Strainer, Angle Seat Check valve, Ball check valve, Wafer check Valve

Size : Ball valves: from d16 to d110 mm, from R3/8" to R4",

Butterfly valves: from d50 to d315 mm, Diaphragm   valves: from d12 to d110 mm, from R1/4" to R2",
Check valves: from d16 to d315 mm, from R3/8" to R4",
Sediment strainer: from d16 to d110 mm, from R3/8" to R4"

Material : U-PVC (Polyvinyl Chloride) Unplasticized

Press Rating/ Oper Temp : 16 bar with water at 20 °C/ 0° ÷ 60° C

Jointing Method : Solvent Cement, Flanging, Threads

Standard : Flanging according to: ISO 7005, DIN 8063, DIN 2501, EN 1452, ANSI B16.5 150,- Solvent welding metric size according to: ISO 727,EN 1452 DIN 8063,- Solvent welding plain inch according to: BS 4346/1, plain tapered to ASTM 2467/76 and JIS standard,- Parallel threads according to: UNI ISO 228/1, DIN 2999, BS 21,- Tapered threads according to: ASA B 2.1 and JIS standard

Certificate/Approval : TA-LUFT, Vd12440, PAS

CPVC Sch80

Application : Chemical distribution, Hot corrosive Liquid, Water Distribution,
Shipping industry ,etc.

Size : Dia 1/2-Dia 12 inch

Material : Compound Type IV grade 1, CPVC (Cell Classification 24448 and
23447)

Standard : ASTM D 1784

Pressure Rating : 85 Bar (1230 psi) for 1/8” to 14.5 Bar (210 psi) for 12”, SF = 2 at 23°C (73°F) and min. 50 years life time design (varies with pipe size and temperature)

Operating Temp. : 0 - 93° C

Jointing Method : Solvent Cements (Cold Fusion),Threading (only for SCH 80),Flanging

Certificate/Approval : NSF approval, IAPD, ASTM, ULC, CSA,ISO, ABS

PP - H

Application : To convey raw & drinking water, chemical process, demineralised & industrial fluid

Size : Pipe : 20 mm - 400 mm

Fittings : Socket Fusion :20mm - 110mm ; Butt Welding : 20mm - 400 mm

Material : PP-H (Homopolymer Polyprophelene)

Standard : Pipe: DIN 8077/8078, UNI 8318 and EN ISO 15494

Fittings : DIN 16962 (Both Socket and Butt fittings) and can be jointed with pipes according to DIN 8077/8078 , UNI 8318, DVS 2207 part 2,EN ISO15494

Pressure Rating : PN 6 and PN 10

Operating Temp. : 0° ÷ 100° C

Jointing Method : Butt Welding or Socket Fusion

Certificate : IQNET, ISO9001, SOP, DIBT, TA-LUFT

PVC Sch80

Application : Water distribution, irrigation system, drinking water, water treatment,
process cooling tower, industrial process, chemical line, Shipping
industry
Size : Dia 1/8-Dia 12 inch (Also available Dia 14”- Dia 24” Based on request)
Material : Compound Type 1, Grade 1 PVC (Cell Classification 12454)
Standard : ASTM D1784
Pressure Rating : 85 Bar (1230 psi ) for 1/8” to 14.5 Bar (210 psi) for 12”, SF = 2 at
23°C (73°F) and min. 50 years life time design (varies with pipe size
and temperature)
Operating Temp. : 0 - 60° C
Jointing Method : Solvent Cements (Cold Fusion),Threading (only for SCH 80),Flanging
Certificate/Approval : NSF approval, IAPD, ASTM, ULC, CSA,ISO, IAPD, ABSaterial.